Ure-a-Cast 1K: High-Performance Protection Without the Two-Part Hassle
When contractors choose a sealer, they want three things: great-looking results, dependable protection, and a product that is easy to work with. Ure-a-Cast 1K was designed to deliver all three.
Ure-a-Cast 1K is a single-component modified urethane coating that provides the durability and performance contractors expect from a high-performance coating—without the hassle of measuring, mixing, and managing a traditional two-component system.
Simply properly prepare the surface, open the container and apply.
What Makes Ure-a-Cast 1K Different?
Traditional two-component urethane coatings can provide excellent durability, but they also require careful mixing and come with a limited working time once the components are combined. That can create unnecessary waste and make smaller projects or touch-ups more difficult.
Ure-a-Cast 1K simplifies the process.
Because it is a single-component product, there is no Part A and Part B to measure or mix. Contractors can use what they need and properly store the remaining product according to manufacturer instructions.
That means less guesswork, less waste, and a more contractor-friendly application.
Where Can Ure-a-Cast 1K Be Used?
Ure-a-Cast 1K is designed to protect and enhance a variety of decorative hardscape surfaces, including:
- Concrete pavers
- Brick pavers
- Decorative concrete
- Stamped concrete
- Natural stone
As with any coating, proper surface preparation and testing are important, especially when working with previously sealed surfaces or dense, non-porous materials.
High Shine With Serious Protection
Ure-a-Cast 1K isn’t just about appearance. It creates an enhancement with a high-shine finish while helping protect the surface from everyday wear and exposure.
Its modified urethane technology provides resistance to staining, scratching, UV exposure, and mildew, making it a strong choice for exterior surfaces that need both beauty and durability.
For paver applications, Ure-a-Cast 1K also helps lock joint sand in place, helping create a cleaner, more finished surface.
Why Contractors Will Appreciate a 1K System
On the jobsite, simplicity matters.
With a two-component coating, once the product is mixed, the clock starts ticking. Contractors have to consider mixing ratios, pot life, application time, and unused material.
Ure-a-Cast 1K eliminates the mixing step.
For contractors, that can mean faster preparation, easier application, reduced product waste, and fewer opportunities for mixing errors. You get professional-grade performance in a system designed to make the job easier.
Surface Preparation Still Matters
Even the best coating can only perform as well as the surface underneath it.
Before applying Ure-a-Cast 1K, surfaces should be properly cleaned and prepared according to Deco Products’ application instructions. Dirt, oils, old coatings, trapped moisture, and other contaminants can interfere with adhesion and the finished appearance.
Remember: good prep isn’t an extra step—it is part of the coating system.
Environmental conditions matter, too. Temperature, humidity, surface moisture, and previous coatings should always be considered before application.
A New Generation of Contractor-Friendly Coatings
At Deco Products, we’ve spent decades developing products around the challenges contractors face in the field. Ure-a-Cast 1K continues that tradition by combining urethane performance with single-component convenience.
No complicated two-part mixing. No unnecessary hassle.
Just a high-performance modified urethane coating designed to enhance, protect, and deliver the professional finish your customers expect.
Ure-a-Cast 1K — 1K simplicity. High-performance results.
*Always review current Deco Products technical data and application instructions before installation to confirm surface compatibility, preparation requirements, coverage rates, and application conditions.
