One-Part Simplicity
- Single-component modified urethane
- No mixing or pot life limitations
- Leftover product can be saved for future projects
- Water-based, non-toxic and non-flammable
High-Shine Modified Urethane Sealer for Pavers, Natural Stone & Decorative Concrete
Product Description
Achieve 2 Part Performance Without the Hassle
When your customers want maximum gloss, exceptional durability, and long-lasting protection, Ure-a-Cast 1K delivers. This innovative single-component modified urethane combines the performance characteristics of a traditional two-part urethane with the simplicity of a ready-to-use water-based system.
Unlike conventional two-part coatings, Ure-a-Cast 1K requires no mixing, no pot life, and no wasted material. Simply open the container and apply. The result is a rich, high-gloss finish that enhances color, locks joint sand, resists stains and scratches, and provides outstanding protection for decorative concrete and hardscape surfaces.
Whether you’re sealing pavers, stamped concrete, natural stone, or brick, Ure-a-Cast gives contractors a premium finish without the complexity of traditional urethane systems.
How to order
To purchase wholesale products from Deco Products, Inc. you will need to speak to our sales and distribution team. Call us now to get connected, and begin discussing price & order options.
Why Contractors Choose Ure-a-Cast 1K
The performance of a 2 part urethane in an easy-to-use 1 part system.
High-Shine Finish
- High-gloss, wet-look finish
- Enhances natural color
- Long-lasting gloss retention
- Color pigments can be added for custom decorative finishes
Protective Performance
- Outstanding scratch and stain resistance
- Excellent UV protection
- Mildew resistant
- Hot tire resistant
- Excellent chemical resistance
- Superior adhesion
- Locks joint sand in paver installations
Recommended Applications
Ure-a-Cast 1K is designed for protecting and enhancing:
- Concrete pavers
- Decorative concrete
- Stamped concrete
- Brick
- Natural stone
- Manufactured stone
- Unglazed tile
- Other cementitious surfaces
Its durable protective film helps preserve the appearance of decorative hardscapes while standing up to everyday traffic and weather exposure.
Previously sealed surface? If an existing coating is present, remove it using Deco Super StripaCast before applying Ure-a-Cast. Clean the substrate thoroughly, repair damaged grout joints or surface defects and allow it to dry completely.
- Finish
- High Shine / Wet Look
- Technology
- Modified Self-Crosslinking Urethane
- Base
- Water-Based
- Application
- Sprayer, Brush, Roller
- Traffic
- Foot traffic after 24 hours; vehicle traffic after 72 hours
Built for Long-Term Protection
Once cured, Ure-a-Cast creates a durable protective film that helps defend surfaces against:
- UV damage
- Water intrusion
- Everyday wear
- Surface scratching
- Common household stains
- Tire marking
- Mildew growth
The result is a beautiful, high-shine finish that continues to perform for years with proper maintenance.
Environmentally Responsible
Like all Deco Products coatings, Ure-a-Cast 1K is manufactured using environmentally responsible, water-based technology.
- Non-toxic
- Non-hazardous
- Non-flammable
- Low environmental impact
- Easy water cleanup
High performance doesn't have to come at the expense of safety or sustainability.
For Distributors, Dealers & Professional Applicators
For more than 35 years, Deco Products has developed innovative decorative sealers trusted by contractors across North America. Every product is engineered to deliver professional performance while remaining easy to use, environmentally responsible, and backed by knowledgeable technical support.
Technical Specifications
Because it is water-based, cleanup is simple while still delivering the premium finish contractors expect from a urethane coating.
Touch DryWithin a few hours
Light Foot Traffic24 hours minimum
Vehicle Traffic72 hours minimum
Application Range50°F to 95°F ambient; surface below 100°F
StorageProtect from freezing; store between 35°F and 85°F
Shelf Life1 year unopened or 6 months after opening when properly stored
Specification Data
Read and understand the current Technical Data and SDS before using Ure-a-Cast 1K.
Purchase Ure-a-Cast 1K from Deco Products
Deco products, Inc. manufactures all of their products in Denver, CO but has suppliers and warehouses set up throughout the USA and in Puerto Rico. To find the nearest place to purchase please call our home office at Toll Free 1-800-500-DECO (3326) or contact us today.
Application Information
Ure-a-Cast 1K is for approved applicators. Read and understand the current Technical Data and SDS before use, and always perform a small test spot to ensure desired results.
-
Prepare the Substrate
Remove all dirt, grease, oils and contaminants. Pressure wash thoroughly, repair damaged grout joints or surface defects and allow the substrate to dry completely.
-
Apply Undiluted
Use a low-pressure pneumatic sprayer, pump-up garden sprayer, brush or roller. Apply a fine mist until the surface is evenly wet, avoiding puddles, drips and runs.
-
Follow Site Limits
Do not apply below 50°F, above 95°F ambient, on surfaces above 100°F, on windy days or when rain is expected. Protect the product from freezing.
-
Allow the Surface to Cure
Allow at least 24 hours before light foot traffic and at least 72 hours before vehicle traffic. Actual cure times vary depending on temperature and humidity.
Recommended Equipment
Light Duty
Light/Medium Duty
Large Duty
Heavy Duty
Applicator instructions are available and should be understood prior to using any of our products. Please feel free to call and talk to one of our experts if you have any questions before using. It is recommended that a skilled applicator apply these products but not required.
Prevent Slips and Falls
Because Ure-a-Cast creates a protective surface film, Deco recommends incorporating a slip-resistant additive in areas where pedestrian safety is a concern, particularly around pool decks, walkways and other potentially slippery surfaces.
ALWAYS DO A TEST SECTION TO ENSURE DESIRED RESULTS
Ure-a-Cast 1K FAQs
Use these answers for initial planning. The current technical data sheet and Deco technical support remain the authority for a specific job.
Ask Deco about your applicationWhat surfaces can Ure-a-Cast 1K seal?
Ure-a-Cast 1K is designed for protecting and enhancing concrete pavers, decorative concrete, stamped concrete, natural stone, manufactured stone, brick, unglazed tile and other cementitious surfaces.
Does Ure-a-Cast 1K require mixing?
No. Ure-a-Cast 1K requires no mixing and has no pot life limitations. Apply the material undiluted according to the current technical data sheet.
How long before people or vehicles can use the sealed surface?
Allow at least 24 hours before light foot traffic and at least 72 hours before vehicle traffic. Actual cure times vary depending on temperature and humidity.
Can Ure-a-Cast 1K be applied over an existing sealer?
If an existing coating is present, remove it using Deco Super StripaCast before applying Ure-a-Cast. Clean the substrate thoroughly, repair damaged grout joints or surface defects and allow it to dry completely.
Is a slip-resistant additive recommended?
Because Ure-a-Cast creates a protective surface film, Deco recommends incorporating a slip-resistant additive in areas where pedestrian safety is a concern, particularly around pool decks, walkways and other potentially slippery surfaces.
Other Products You Might Like
SilaCast BES
Renew and enhance concrete pavers, concrete roof tiles and other porous substrates.
Deco 20 Clear Finish
Dramatically reduces the amount of time for mold and mildew to return after cleaning. 100% transparent.
TravaCast
Topical acrylic sealer for non-porous materials such as Travertine tile and other natural stone.
Super StripaCast
Non-Hazardous liquid stripper that safely removes most sealers and coatings from concrete tiles and other similar materials.
Salt Shield 303
Protects concrete from de-icers and salts. Will aid in reducing spalling in concrete.
Bio Blacktop
Non-asphalt driveway sealer. Designed for sealing and conditioning while adding excellent protection from chemicals and UV rays.
ColorCast
Bring back the vibrant colors your pavers once had. Our penetrating technology injects the color into the substrate.
F9 Restoration
These soft wash cleaners can remove rust, irrigation stains, battery stains, and other contaminants WITH NO DAMAGE to your surface.
Construction Products You Might Like
Deco 20 Seal
Waterproofing Membrane for masonry, pre-cast and poured concrete foundation walls
Deco 20 Dampproof
Dampproofs and seals residential masonry block and concrete foundation walls.
DECO 20 Clear Sealer
For dampproofing of masonry block, pre-cast and poured concrete foundation walls
Deco Tie Patch
Advanced hybrid acrylic resin patching material used to fill holes and recesses from the removal of concrete form ties
Deco Healthy Walls
Non-hazardous penetrating concrete sealer protects interior foundation walls from moisture intrusion.
Deco Foundation Wall Guard
Extra strength foundation waterproofing designed for use with the structural repair industry.
DecoTac
Waterborne Primer/Adhesive designed to promote extra bonding when unable to strip previous coatings.
Decorative Products
See our full line of Decorative Sealers to enhance and protect natural stone.
