Home Page

Contact Us

 

 

 


Made In the USA

 

Deco Products
7900 E. 40th Ave.
Denver, CO 80207

1-800-500-DECO

DECO 20 SEAL meets the following ASTMs:

►ASTM C 1306, Hydrostatic pressure over cracks

►ASTM C 836, Section 6.7 Low-temperature
flexibility and crack bridging

►ASTM C 836, Section 6.10 Adhesion strength

►ASTM D 2939, Section 15 Resistance to water

►ASTM C 836, Section 6.9 Remain in place during
application (film thickness)

►ASTM E 96, Water vapor permeance
(transmission)

►ASTM C 836, Section 6.12 Extensibility after
heat aging

Additional Testing Outside the Scope of AC 29

►ASTM E 154, Section 13 Resistance to decay

►ASTM D 2565-1999, Color fastness of
surface coating

►ASTM D 3273-94, Resistance to mold growth of surface coating

 

Technical Data

MSDS

ICC Report

 

 

 

Product Information - Foundations

DECO 20 SEAL Waterproofing Membrane

COMPLETELY WATER BASED  •   NO COLOR FADE   •   UV RESISTANT

 

 

DESCRIPTION:
DECO 20 Seal Waterproofing Membrane is an advanced hybrid acrylic resin coating that is specifically designed for the demanding requirements of waterproofing parged and non-parged masonry, pre-cast and poured concrete foundation walls. On masonry walls, DECO 20 Clear Sealer must be applied prior to the application of DECO 20 SEAL. DECO 20 Seal Waterproofing Membrane is designed for use as a waterproof coating when hydrostatic pressure caused by the water table does exist.

USE:
New construction: Waterproofs and seals masonry, pre-cast and poured concrete foundation walls.  For approved applicators.

WARRANTY:
DECO 20 Seal Waterproofing Membrane is warranted as specified from date of C.O. (Certificate of Occupancy).

BENEFITS:
Approved by the 2003 Int'l Building Code

Will stop water leaks in nonstructural cracks

Can be applied to damp walls

Continuous coating, eliminates seams

Can be applied from the footing to top of wall

Eliminates the need for 6 mil poly

Standard color is gray - can be painted over

Allows for better curing of concrete walls

Airless sprayer application

Reduces potential mold growth